[1] I. Ahmed, Z. Hasan, N.A. Khan, S.H. Jhung, Adsorptive denitrogenation of model fuels with porous metal-organic frameworks (MOFs): Effect of acidity and basicity of MOFs, Applied Catalysis B: Environmental, 129 (2013) 123-129.
[2] D. Kim, H. Ahn, W. Yang, K.Y. Huh, Y. Lee, Experimental analysis of CO/H2 syngas with NOx and SOx reactions in pressurized oxy-fuel combustion, Energy, 219 (2021) 119550.
[3] G. Blanco-Brieva, J.M. Campos-Martin, S.M. Al-Zahrani, J.L.G. Fierro, Effectiveness of metal–organic frameworks for removal of refractory organo-sulfur compound present in liquid fuels, Fuel, 90 (2011) 190-197.
[4] R.K. Rahman, S. Barak, K.R.V. Manikantachari, E. Ninnemann, A. Hosangadi, A. Zambon, S.S. Vasu, Probing the effects of NOx and SOx Impurities on oxy-fuel combustion in supercritical CO2: Shock tube experiments and chemical kinetic modeling, Journal of Energy Resources Technology, 142 (2020).
[5] I. Ahmed, S.H. Jhung, Adsorptive denitrogenation of model fuel with CuCl-loaded metal–organic frameworks (MOFs), Chemical Engineering Journal, 251 (2014) 35-42.
[6] K. Jiang, H. Yu, L. Chen, M. Fang, M. Azzi, A. Cottrell, K. Li, An advanced, ammonia-based combined NOx/SOx/CO2 emission control process towards a low-cost, clean coal technology, Applied Energy, 260 (2020) 114316.
[7] Z.u. Rahman, J. Zhang, L. Zhang, X. Wang, Z. Yang, H. Tan, R.L. Axelbaum, A kinetic evaluation and optimization study on NOx reduction by reburning under pressurized oxy-combustion, Journal of Environmental Management, 290 (2021) 112690.
[8] A.J. Hernández-Maldonado, R.T. Yang, Desulfurization of diesel fuels via π-complexation with nickel (II)-exchanged X-and Y-zeolites, Industrial and Engineering Chemistry Research, 43 (2004) 1081-1089.
[9] L. Hockstad, M. Weitz, Inventory of U.S. Greenhouse Gas Emissions and Sinks: 1990-2013, Washington, DC 20460, U.S.A, 2015.
[10] L. Hockstad, L. Hanel, Inventory of U.S. Greenhouse Gas Emissions and Sinks,; Environmental System Science Data Infrastructure for a Virtual Ecosystem, 2018.
[11] G. Janssens-Maenhout, M. Crippa, D. Guizzardi, M. Muntean, E. Schaaf, J.G. Olivier, J. Peters, K.M. Schure, Fossil CO2 and GHG emissions of all world countries, Joint Research Center: Brussels, Belgium, 2017.
[12] H. Amini, S.-M. Taghavi-Shahri, S.B. Henderson, V. Hosseini, H. Hassankhany, M. Naderi, S. Ahadi, C. Schindler, N. Künzli, M. Yunesian, Annual and seasonal spatial models for nitrogen oxides in Tehran, Iran, Scientific Reports, 6 (2016).
[13] محمد محمودی آریا، حمید ممهدی هروی، مطالعه عددی و آزمایشگاهی تاثیر رقیق ساز N2 بر تشکیل آلاینده NOx در شعله پیشآمیخته متان-هوا, نشریه علمی- پژوهشی سوخت و احتراق شماره اول., (1389).
[14] D. Liu, J. Gui, Z. Sun, Adsorption structures of heterocyclic nitrogen compounds over Cu (I)Y zeolite: A first principle study on mechanism of the denitrogenation and the effect of nitrogen compounds on adsorptive desulfurization, Journal of Molecular Catalysis A: Chemical, 291 (2008) 17-21.
[15] S. Anisuzzaman, D. Krishnaiah, S. Abang, G. Labadin, Adsorptive Denitrogenation of fuel by oil palm shells as low cost adsorbents, Journal of Applied Sciences, 14 (2014) 3156.
[16] I. Ahmed, J.W. Jun, B.K. Jung, S.H. Jhung, Adsorptive denitrogenation of model fossil fuels with Lewis acid-loaded metal–organic frameworks (MOFs), Chemical Engineering Journal, 255 (2014) 623-629.
[17] R. Prins, Catalytic hydrodenitrogenation, in: Advances in Catalysis, Academic Press, 2001, pp. 399-464.
[18] Y. Feng, A study on the process conditions of removing basic nitrogen compounds from gasoline, Petroleum Science and Technology journal, 22 (2004) 1517-1525.
[19] S.-W. Lee, J.W. Ryu, W. Min, SK hydrodesulfurization (HDS) pretreatment technology for ultralow sulfur diesel (ULSD) production, Catalysis Surveys from Asia, 7 (2003) 271-279.
[20] G.W. Mushrush, M.A. Quintana, J.W. Bauserman, H.D. Willauer, Post-refining removal of organic nitrogen compounds from diesel fuels to improve environmental quality, Journal of Environmental Science and Health, Part A, 46 (2011) 176-180.
[21] Y. Sano, K.-H. Choi, Y. Korai, I. Mochida, Adsorptive removal of sulfur and nitrogen species from a straight run gas oil over activated carbons for its deep hydrodesulfurization, Applied Catalysis B: Environmental, 49 (2004) 219-225.
[22] H.E. Emam, R.M. Abdelhameed, H.B. Ahmed, Adsorptive Performance of MOFs and MOF containing composites for clean energy and safe environment, Journal of Environmental Chemical Engineering, 8 (2020) 104386.
[23] G.C. Laredo, P.M. Vega-Merino, J.A. Montoya-de la Fuente, R.J. Mora-Vallejo, E. Meneses-Ruiz, J.J. Castillo, B. Zapata-Rendón, Comparison of the metal–organic framework MIL-101 (Cr) versus four commercial adsorbents for nitrogen compounds removal in diesel feedstocks, Fuel, 180 (2016) 284-291.
[24] I. Ahmed, M.M.H. Mondol, H.J. Lee, S.H. Jhung, Application of metal-organic frameworks in adsorptive removal of organic contaminants from water, Fuel and Air, Chemistry – An Asian Journal, 16 (2021) 185-196.
[25] F. Tian, X. Sun, X. Liu, H. Zhang, J. Liu, H. Guo, Y. Zhang, C. Meng, Effective adsorptive denitrogenation from model fuels over yttrium ion-exchanged Y zeolite, Chinese Journal of Chemical Engineering, 28 (2020) 414-419.
[26] A.J. Hernández‐Maldonado, R.T. Yang, Denitrogenation of transportation fuels by zeolites at ambient temperature and pressure, Angewandte Chemie, 116 (2004) 1022-1024.
[27] X. Hong, K. Tang, Absorptive Denitrogenation of diesel oil using a modified nay molecular sieve, Petroleum Science and Technology journal, 33 (2015) 1471-1478.
[28] H. Xin, T. Ke, Preparation and adsorption denitrogenation from model fuel or diesel oil of heteroatoms mesoporous molecular sieve Co-MCM-41, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 38 (2016) 2560-2567.
[29] H. Zhang, G. Li, Y. Jia, H. Liu, Adsorptive removal of nitrogen-containing compounds from fuel, Journal of Chemical and Engineering Data, 55 (2009) 173-177.
[30] H. Zhang, H. Song, Study of Adsorptive denitrogenation of diesel fuel over mesoporous molecular sieves based on breakthrough curves, Industrial and Engineering Chemistry Research, 51 (2012) 16059-16065.
[31] M. Songolzadeh, M. Soleimani, M. Takht Ravanchi, Multi-response optimization of MIL-101 synthesis for selectively adsorbing N-compounds from fuels, Petroleum Science, 16 (2019) 1442-1454.
[32] M. Songolzadeh, M. Soleimani, M.T. Ravanchi, Synthesis and optimization of a new MIL-100 adsorbent for removing basic N-compounds from liquid fuels, Petroleum Science and Technology, 37 (2019) 2383-2390.
[33] محمد سنگل زاده، منصوره سلیمانی، مریم تخت روانچی، جداسازی کینولین از سوخت مدل ایزواکتان با استفاده از چارچوبهای آلی – فلزی بر پایه مشتقات کربوکسیلیک اسیدها، رساله دکتری، مهندسی شیمی, صنعتی امیرکبیر (پلی تکنیک تهران), 1397.
[34] K. Castro, M. Pérez, M.D. Rodríguez-Laso, J.M. Madariaga, Peer Reviewed: FTIR Spectra Database of Inorganic Art Materials, in, ACS Publications, 2003.
[35] A. Kuptsov, G.N. Zhizhin, Handbook of Fourier transform Raman and infrared spectra of polymers, Elsevier, 1998.
[36] I. Ahmed, J.W. Jun, B.K. Jung, S.H. Jhung, Adsorptive denitrogenation of model fossil fuels with Lewis acid-loaded metal–organic frameworks (MOFs), Chemical Engineering Journal, 255 (2014) 623-629.
[37] Z. Wang, Z. Sun, L. Kong, G. Li, Adsorptive removal of nitrogen-containing compounds from fuel by metal-organic frameworks, Journal of Energy Chemistry, 22 (2013) 869-875.