[1] Weijermars, R., Jackson, M.P.A. & Dooley, T.P., 2013. Quantifying drag on wellbore casings in moving salt sheets, Geophys. J. Int., 198(2): 965-977.
[2] Taheri,. S.R., Pak, A., Shad, S., Mehrgini, B., Razifar, M., 2020. Investigation of rock salt layer creep and its effects on casing collapse. Int J of Mining Sci and Technol, 30: 357–365.
[3] Mohammadi, S., Sedaghatzadeh, M., Pourafshary, P., 2020. Solid-geo-mechanical investigation of the effect of salt creep on casing stability using finite element method: a case study. SN Applied Sciences. 2, 1268. Doi: 10.1007/s42452-020-3083-7.
[4] Zoback, M., 2008. Reservoir Geomechanics. Cambridge Univ Press.
[5] Marinos, P., Hoek, E., 2001. Estimating the geotechnical properties of heterogeneous rock masses such as flysch. Bull. Eng. Geol. Environ., 60, 85–92.
[6] CGS (Canadian Geotechnical Society), 1985. Canadian Foundation Engineering Manual. Part 2, second ed. Vancouver, British Columbia, Canada.
[7] ISRM, 2007. The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. In: Ulusay R, Hudson JA (eds) Suggested methods prepared by the commission on testing methods, international society for rock mechanics, compilation arranged by the ISRM Turkish National Group, Ankara, Turkey.
[8] Bell, F.G., 1981. “Geotechnical properties of some evaporitic rocks”, Bulletin of the International Association of Engineering Geology, 24, pp 137-144.
[9] Hangx, S., Spiers, C., Peach, C., 2009. The mechanical behavior of anhydrite and the effect of Co2 injection. Energy Procedia, 1: 3485-3492.
[10] Karacan, E., Yilmaz, I., 2000. “Geotechnical evaluation of Miocene gypsum from Sivas (Turkey)”, Geotechnical and Geological Engineering, 18: 79-90.
[11] Hashemi, M., Saki, A., Nikudel, M.R., 2020. Effects of chemical composition on the solubility and geomechanical characteristics of gypsum rocks from Gachsaran Formation, Iran. Bulletin of Engineering Geology and the Environment. Doi: 10.1007/s10064-020-01794-y.
[12] Pourmorad, S., Jokar, A., Jahan, S., 2021. Determination of key beds from the cap rocks of oil reservoirs using a novel method, Case study: The Gachsaran Formation, Southwest Iran. Lithology and Mineral Resources, 56: 559-578.
[13] Alizadeh, B., Maroufi, K., Fajrak, M., 2018. Oil-oil correlation, geochemical characteristics, and origin of hydrocarbons from Mansourabad oilfield, SW Iran. J of African Earth Sciences. DOI: 10.1016/j.jafrearsci.2018.06.008.
[14] Mehrgini, B., Memarian, H., Dusseault, M., Ghavidel, A., Heydarizadeh, M., 2016. Geomechanical characteristics of common reservoir caprock in Iran (Gachsaran Formation), experimental and statistical analysis. J of Nat Gas Sci and Eng, 34: 898-907.
[15] Ghavidel, N.A., Nezam, A., Heydarizadeh, M., Moosavi, M., Memarian, H., 2014. Identification of rheological behavior of salt rock at elevated temperature, Case study: Gachsaran evaporative formation, Iran. ISRM Regional Symposium – EUROCK, Vigo, Spain.
[16] مهرگینی، ب.، 1395. بررسی رفتار پوشسنگ مخزن آسماری در اثر فشار افزایی ناشی از تزریق گاز به منظور افزایش بهرهبرداری. رساله دکتری. دانشکده مهندسی معدن، دانشگاه تهران، 195 ص.
[17] Ghodusi, F., Jalalifar, H., Jafari, S., 2019. Analysis of the casing collapse in terms of geomechanical parameters and solid mechanics. J of Chemical and Petrol Eng, 53(2): 211-225.
[18] Dehghan, A.N., Khodaei, M., 2021. The effect of rock salt creep behavior on wellbore instability in one of the southwest iranian oil fields. Arab Geosci, 14, 2079.
[19] ASTM D4543-08, 2008. Standard practices for preparing rock core as cylindrical test specimens and verifying conformance to dimensional and shape tolerances. American Society for Testing and Materials, West Conshohocken, PA.
[20] ASTM D7012-14, 2014. Standard test method for compressive strength and elastic moduli of intact rock core specimens under varying states of stress and temperatures. American Society for Testing and Materials, West Conshohocken, PA.
[21] Hoxha, D., Homand, F., Auvray, C., 2006. Deformation of natural gypsum rock: Mechanisms and questions. Engineering Geology, 86: pp: 1-17.
[22] Bartel, E. M., Neubauer, F., Heberer, B., Genser, J., 2014. A low-temperature ductile shear zone: The gypsum-dominated western extension of the brittle Fella-Sava Fault, Southern Alps. J. of Structural Geology, 69:18-31.
[23] Griggs, D., 1939. Creep of Rocks. The J of Geology, 47(3): 225-251.
[24] Craker, W.E., Schiller, K.K., 1962. Plastic deformation of gypsum. Nature, 193: 672-673.
[25] Jeremic, M.L., 1994. Rock Mechanics in Salt Mining. CRC Press.
[26] وحدت، ر.، 1391. بررسی تغییرشکل پذیری مصالح ژیپس تحت شرایط مختلف. پایاننامه کارشناسی ارشد مهندسی عمران، دانشکده فنی دانشگاه زنجان. 93 ص.
[27] Dudley, J.W., Brignoli, M., Crawford, B.R., Ewy, R.T., Love, D.K., McLennan, J.D., Ramos, G.G., Shafer, J.L., Sharf-Aldin, M.H., Siebrits, E., Boyer, J., Chertov, M.A., 2016. ISRM Suggested Method for Uniaxial-Strain Compressibility Testing for Reservoir Geomechanics. Rock Mech Rock Eng, 49:4153–4178.
[28] Ghobadi, M.H., Mohamadian, M., Mohseni, H., Karami, R., 2013. Effects of engineering geological properties of Gachsaran Formation gypsum on karst development (Khuzestan, Ramhormoz). Journal of Iranian association of Engineering Geology. Vol. 6(3-4):1-16. (in farsi).
[29] Caselle, C., Bonetto, S., Colombero, C., Comina, C., 2019. Mechanical properties of microcrystalline branching selenite gypsum samples and influence of constituting factors. J of Rock Mech and Geotech Eng 11: 228-241
[30] ASTM D-4406, 1996. Test Method for Creep of Cylindrical Rock Core Specimen in Triaxial Compression. ASTM International, USA.
[31] Aydan, Ö., Ito, T., Özbay, U., Kwasniewski, M., Shariar, K., Okuno, T., Özgenog˘lu, A., Malan, D.F., Okada, T., 2014. ISRM Suggested Methods for Determining the Creep Characteristics of Rock. Rock Mech Rock Eng. 47: 275–290.
[32] زینلزاده، ا.، 1387. مدلسازی حرارتی مقطع عرضی تاقدیس گچساران. مجله علوم دانشگاه شهید چمران اهواز. جلد 19(ب): ص 46-59.
[33] گرجیان، م.، موسوی، م.، معماریان، ح.، میرمحمدلو، ع.، 1389. تأثیر دما بر خصوصیات ژئومکانیکی انیدریتهای سازند تبخیری گچساران. چهاردهمین همایش انجمن زمینشناسی ایران. شهریورماه سال 1389، دانشگاه ارومیه.
[34]موسوی حرمی، ر.، محبوبی، ا.، امیری بختیار، ح.، باوی عویدی، ع.، 1388. تاریخچه رسوبگذاری سازند گچساران (پوشسنگ مخزن آسماری) در میدان نفتی آب تیمور. پژوهش نفت، سال 19، جلد 60: ص 30-43.
[35] Jaeger, J. L., Cook, N.G.W., Zimmeman, R.W., 2007. Fundamentals of rock mechanics. Blackwell Publishing, Fourth Edition.
[36] Liang, W., Yang, X., 2012. Experimental study of mechanical properties of gypsum soaked in brine. Rock Mechanics and Mining Sciences, 53: 142-150.
[37] Medvedev G.A., Caruthers J.M., 2015. Stochastic Model Prediction of Nonlinear Creep in Glassy Polymers, Polymer, doi: 10.1016/j.polymer.
[38] Cristescu, N.D., Hunsche, U., 1998. Time effects in Rock Mechanics. John Willey & Sons.
[39] Altenbach, H., Gorash, Y., Naumenko, K., 2008. Steady-state creep of a pressurized thick cylinder in both the linear and the power law ranges. Acta Mechanica, 195: 263–274.
[40] Aydan, O., Akagi, T., Kawamoto, T., 1996. The squeezing potential of rock around tunnels: theory and prediction with examples taken from Japan. J Rock Mech Rock Eng, 29(3):125–143.
[41] Singh, A.K., Balasingh, C., Mao, H.K., Hemley, R.J., Shu, J., 1998. Analysis of lattice strains measured under nonhydrostatic pressure. J Appl Phys, 83:7567–7575.
[42] Jones, D.R.H., Ashby, M.F., 2019. Engineering Materials: An Introduction to Properties, Applications and Design. Fifth Ed., Elsevier. 564 p.
[43] May, D.L., Gordon, A.P., Segletes, D.S., 2013. The application of the Norton-Bailey law for creep prediction through power law regression. Proceedings of ASME Turbo Exposition 2013: Turbine Technical Conference and Exposition, San Antonio, Texas, USA.
[44] Zulauf, J., Zulauf, G., 2004. Rheology of plasticine used as rock analogue: the impact of temperature, composition and strain. J of Structural Geology, 26: 725–737.
[45] Ghanadian, M., Faghih, A., Abdollahie Fard, I., Kusky, T., Maleki, M., 2017. On the role of incompetent strata in the structural evolution of the Zagros Fold-Thrust Belt, Dezful Embayment, Iran. Marine and Petroleum Geology 81: 320-333.
[46] زمانی، ن.، فاتحی مرجی، م.، سلطانیان، ح.، عبدالهی پور، ا.، 1398. آنالیز برگشتی پارامترهای ژئومکانیکی مدل برگر و شبیهسازی آزمایش خزش تکمحوره سنگ نمک میدان نفتی کوپال با استفاده از FLAC3D، سومین کنفرانس ملی ژئومکانیک نفت، تهران.
[47] کریمی، م.ر.، 1385. بررسی علل مچالگی لولههای جداری میدان نفتی مارون. بیست و نهمین گردهمایی علوم زمین، سازمان زمینشناسی و اکتشافات معدنی کشور.
[48] هاشمی، ص.، سلیمانی، ب.، ناصری کریموند، ف.، 1394. بررسی دلایل مچالگی لولههای جداری و تغییرات فشار سازندی زون 4 بخش 7 سازند گچساران در میدان نفتی مارون. نشریه پژوهش نفت، جلد 25، شماره 2-85.
[49] قبادی، م.ح.، احمدزاده، ج.، طالب بیدختی، ع.، 1393. بررسی رفتار خزشی درازمدت انیدریت سازند گچساران در مقیاس آزمایشگاهی. سی و سومین گردهمایی علوم زمین، سازمان زمینشناسی و اکتشافات معدنی کشور.
[50] Bérest, P., Karimi-Jafari, M., and Brouard, B., 2005. Transient Creep in Salt Caverns, In Proceedings of 2005 ASME/ASCE/SES Conference on Mechanics and Materials, Louisiana,USA.
[51] Hunsche, U., Hampel, A., 1999. Rock salt — the mechanical properties of the host rock material for a radioactive waste repository. Engineering Geology, 52: 271–291.
[52] Tang, L., Zhao, Y., Liao, J., Liu, Q., 2020. Creep Experimental Study of Rocks Containing Weak Interlayer Under Multilevel Loading and Unloading Cycles. Frontiers in Earth Science, 8: 1-14.
[53] Hosseini, S.M.A., Sereshki, F., Shariati, M., Jalali, S.M.E., Crotogino, F., 2012. Development of a new creep testing equipment to obtain long-term deformation parameters of salt. J of Mining & Environment, 3(1): 27-32.